2008.10-2009.09，剑桥大学工程系，公派联合培养博士生

2004.09-2010.07，清华大学热能系，博士学位

2000.09-2004.07，清华大学热能系，学士学位

工作履历

2021.12-今，清华大学能动系，副研究员

2014.05-2021.11，清华大学能动系（原热能系），讲师、助理研究员

2010.08-2014.03，Tohoku University, Japan, Research Associate

学术兼职

1. 工程热物理学会热机气动热力学分会，青年委员

2. 《Propulsion&Energy》及《推进技术》杂志，青年编委

3. 本领域国内外多个期刊审稿人

研究领域

1. 叶轮机械内部流动机理

2. 多物理场耦合及伴随理论和伴随优化

3. 内流复杂湍流机理与模拟模型

4.飞行器外流及内外流一体化

5. 计算流体力学与工业软件

研究概况

在研科研项目

1. 自然科学基金面上项目，全覆盖气膜在三个空间尺度上的关键机制和冷却有效度面分布理论

2. 重大专项基础研究和关键技术研究课题

3. 重大项目关键技术及样机研制

已完成科研项目

1. 自然科学基金青年项目，基于伴随理论和谐波平衡方法的多级叶轮机械非定常气动设计研究（结题评价“优+”）

2. 自然科学基金面上项目，非均匀边界环境下气冷透平的伴随边界理论及流热机理研究（结题评价“优秀”）

3. 自然科学基金国际合作项目，旋转环境气冷透平动叶叶顶间隙内流动传热特性高精度测量与模拟方法研究

奖励与荣誉

1. Journal of Thermal Science、Chinese Journal of Aeronautics期刊优秀审稿人

2. 动力工程学会透平专委会2016、2018、2020、2023年度优秀论文奖

3. 中国航空学会动力分会2023年优秀论文奖

4. 工程热物理学会2018年度热能动力技术学术会议优秀论文一等奖

For more information, please check:  https://www.researchgate.net/profile/Xinrong-Su

(1) Huang, T.; Li, H.; Su, X.; Yuan, X. Influence of Film Hole Arrangement on Cooling and Aerodynamic Performance of Blade Tip with Squealer Structure. International Journal of Thermal Sciences 2024, 195, 108636. https://doi.org/10.1016/j.ijthermalsci.2023.108636.

(2) Mao, Y.; Su, X.; Yuan, X. An Off-Design Flow Angle Model Based on Averaged-Flow Theory and Wake Analysis. Journal of Thermal Science 2023, 32 (2). https://doi.org/10.1007/s11630-023-1774-2.

(3) Zhang, Z.; Hu, T.; Su, X.; Yuan, X. Optimization of the Double-Expansion Film-Cooling Hole Using CFD. Entropy 2023, 25, 3. https://doi.org/10.3390/e25030410.

(4) Zhang, H.; Gou, J.; Yin, P.; Su, X.; Yuan, X. Film-Cooling Hole Optimization and Experimental Validation Considering the Lateral Pressure Gradient. Frontiers in Mechanical Engineering 2023, 8. https://doi.org/10.3389/fmech.2022.973293.

(5) Huang, T.; Su, X.; Yuan, X. Influence of Film Cooling Hole Geometry on the Gas Turbine Blade Strength. In Proceedings of Global Power and Propulsion Society; Hong Kong, 2023.

(6) Hu, K.; Zhang, Z.; Su, X.; Yuan, X. Efficient Assessment of Turbine Blade Performance with Non-Uniform Boundary Condition Using Adjoint Sensitivity. In Proceedings of Global Power and Propulsion Society; Hong Kong, 2023.

(7) Wang, Q.; Su, X.; Yuan, X. Large-Eddy Simulation of Shaped Hole Film Cooling with the Influence of Cross Flow. International Journal of Turbo and Jet Engines 2022, 39 (4), 575–588. https://doi.org/10.1515/tjj-2020-0012.

(8) Mao, Y.; Chen, Z.; Su, X.; Yuan, X. A Novel Model for CFD-Based Throughflow Analysis of Film-Cooled Turbine Blade. Journal of Thermal Science 2022, 31 (5), 1759–1772. https://doi.org/10.1007/s11630-022-1579-8.

(9) Chen, Z.; Su, X.; Yuan, X. Trajectory and Effectiveness of Film Cooling in Endwall Crossflow. Aerospace Science and Technology 2022, 128, 107795. https://doi.org/10.1016/j.ast.2022.107795.

(10) Zhang, Z.; Mao, Y.; Su, X.; Yuan, X. Inversion Learning of Turbulent Thermal Diffusion for Film Cooling. Physics of Fluids 2022, 34 (3), 035118. https://doi.org/10.1063/5.0084237.

(11) Chen, Z.; Mao, Y.; Hu, K.; Su, X.; Yuan, X. Theoretical Model for Two-Dimensional Film Cooling Effectiveness Distribution Prediction. Physics of Fluids 2022, 34 (2), 025122. https://doi.org/10.1063/5.0081694.

(12) Hu, K.; Wang, Q.; Su, X.; Yuan, X. Large-Eddy Simulation of Shaped Hole Film Cooling with the Influence of Streamwise Pressure Gradient. In Proceedings of Global Power and Propulsion Society; Xian, China, 2022.

(13) Huang, T.; Li, H.; Su, X.; Yuan, X. Influence of Depth and Rim Width of Squealer Tip on the Leakage Flow and Heat Transfer. In Proceedings of Global Power and Propulsion Society; Xian, China, 2022.

(14) Mao, Y.; Su, X.; Yuan, X. Unsteady Analysis with Throughflow Concept. In Proceedings of Global Power and Propulsion Society; Xian, China, 2022.

(15) Zhang, Z.; Mao, Y.; Su, X.; Yuan, X. Adjoint-Based Boundary Condition Sensitivity Analysis. AIAA Journal 2022, 60 (6), 3517–3527. https://doi.org/10.2514/1.J061307.

(16) Chen, Z.; Su, X.; Yuan, X. Cooling Performance of the Endwall Vertical Hole Considering the Interaction between Cooling Jet and Leading-Edge-Horseshoe Vortex. Journal of Thermal Science 2022, 31 (5), 1696–1708. https://doi.org/10.1007/s11630-022-1595-8.

(17) Wang, Q.; Su, X.; Yuan, X. Assessment of the Turbulence Characteristics of Shaped Film Cooling Hole with Scale Resolving Simulation. Journal of Thermal Science 2022, 31, 47–61. https://doi.org/10.1007/s11630-022-1545-5.

(18) Su, X.; Yuan, X. Adjoint Boundary Sensitivity Method to Assess the Effect of Nonuniform Boundary Conditions. Chinese Journal of Aeronautics 2022, 35 (2), 12–16. https://doi.org/10.1016/j.cja.2021.04.029.

(19) Chen, Z.; Su, X.; Yuan, X. Interaction Mechanism and Loss Analysis of Mixing between Film Cooling Jet and Passage Vortex. Entropy 2022, 24, 15. https://doi.org/10.3390/e24010015.

(20) Chen, Z.; Hu, K.; Mao, Y.; Su, X.; Yuan, X. Simple Integral Model for Trajectories of Jet Deflection in Crossflow. Physics of Fluids 2021, 33 (11), 111703. https://doi.org/10.1063/5.0073013.

(21) Mao, Y.; Chen, Z.; Li, H.; Su, X.; Yuan, X. On the Relationship between Blade Loading and In-Passage Energy Balance. Aerospace 2021, 8 (11), 324. https://doi.org/10.3390/aerospace8110324.

(22) Chen, Z.; Mao, Y.; Hu, K.; Su, X.; Yuan, X. 2-D Prediction Method for Multi-Row Film Cooling Effectiveness. Applied Thermal Engineering 2021, 199 (25), 117607. https://doi.org/10.1016/j.applthermaleng.2021.117607.

(23) Li, H.; Su, X.; Yuan, X. Analysis of the Relationship between Turbulence Characteristics and Loss Mechanism in the Tip Leakage Flow of Turbine Blade. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 2021, 235 (6), 1302–1314. https://doi.org/10.1177/09576509211032077.

(24) Su, X.; Bian, X.; Li, H.; Yuan, X. Unsteady Flows of a Highly Loaded Turbine Blade with Flat Endwall and Contoured Endwall. Aerospace Science and Technology 2021, 118, 106989. https://doi.org/10.1016/j.ast.2021.106989.

(25) Zhang, Z.; Li, H.; Su, X.; Yuan, X. In-Hole Characteristic Interface and Film Cooling Interface Model. Journal of Turbomachinery 2021, 143 (10), 101012. https://doi.org/10.1115/1.4050757.

(26) Chen, Z.; Li, Y.; Su, X.; Yuan, X. Scalar Diffusion Equation Based Model to Predict 2-D Film Cooling Effectiveness of a Shaped Hole. Journal of Turbomachinery 2021, 143 (4), 041005. https://doi.org/10.1115/1.4049782.

(27) Wang, Q.; Ma, C.; Su, X.; Yuan, X. Effect of Unsteady Secondary Vortices on the Performance of a 1.5-Stage High-Pressure Turbine. Journal of Thermal Science 2021, 30 (3), 983–998. https://doi.org/10.1007/s11630-020-1371-6.

(28) 陈子聿; 李毅飞; 苏欣荣; 袁新. 基于标量扩散方程的气膜冷却二维分布理论模型. 工程热物理学报 2021, 42 (8), 1958–1963.

(29) 胡可欣; 王青松; 苏欣荣; 袁新. 顺压梯度环境下成型孔气膜冷却射流的大涡模拟. 热能动力工程 2021, 36 (9), 146–153.

(30) 张振; 陈子聿; 苏欣荣; 袁新. 基于孔内流动机理的气膜冷却界面模型. 工程热物理学报 2021, 42 (7), 1692–1699.

(31) 李会; 苏欣荣; 袁新. 基于DDES模拟的叶顶间隙流湍流特性研究. 工程热物理学报 2021, 42 (2), 342–348.

(32) Wang, Q.; Su, X.; Yuan, X. Assessment of the Turbulence Characteristics of Shaped Film Cooling Hole with Scale Resolving Simulation. In Asian Congress on Gas Turbine; Beijing, China, 2021.

(33) Li, H.; Su, X.; Yuan, X. DDES Analysis of Unsteady Characteristics of the Interaction between the Tip Leakage Flow and Wake. In Asian Congress on Gas Turbine; Beijing, China, 2021.

(34) Zhang, H.; Wang, Q.; Chen, Z.; Su, X.; Yuan, X. Effects of Compound Angle on Film Cooling Effectiveness Considering Endwall Lateral Pressure Gradient. Aerospace Science and Technology 2020, 103, 105923. https://doi.org/10.1016/j.ast.2020.105923.

(35) 卞修涛; 苏欣荣; 袁新. 基于DDES的透平端区湍流特性和损失机理研究. 工程热物理学报 2020, 41 (8), 1895–1902.

(36) 陈子聿; 苏欣荣; 袁新. 气冷透平端区射流与主流的交互作用研究. 风机技术 2020, No. 3, 46–51. https://doi.org/10.16492/j.fjjs.2020.03.0007.

(37) 张浩; 陈子聿; 李毅飞; 苏欣荣; 袁新. 基于多精度代理模型的高效异型气膜孔设计优化和实验验证. 工程热物理学报 2020, 41 (1), 128–134.

(38) Zhang, Z.; Ma, C.; Su, X.; Yuan, X. Accuracy and Efficiency Assessment of Harmonic Balance Method for Unsteady Flow in Multi-Stage Turbomachinery. Journal of Thermal Science 2020, 29, 1569–1580. https://doi.org/10.1007/s11630-020-1201-x.

(39) Bian, X.; Wang, Q.; Su, X.; Yuan, X. Interaction Mechanisms of Shock Wave with Boundary Layer and Wake in a Highly-Loaded NGV Using Hybrid RANS/LES. Chinese Journal of Aeronautics 2020, 33 (1), 149–160. https://doi.org/10.1016/j.cja.2019.07.008.

(40) Chen, Z.; Li, Y.; Su, X.; Yuan, X. Accuracy Assessment of the Sellers Model in Predicting the Multi-Row Film Cooling Performance. In Proceedings of ASME Turbo Expo 2020, GT2020-14323; American Society of Mechanical Engineers: Online, 2020. https://doi.org/10.1115/GT2020-14323.

(41) Zhang, Z.; Chen, Z.; Su, X.; Yuan, X. Non-Uniform Source Term Model for Film Cooling With the Internal Cross Flow. In Proceedings of ASME Turbo Expo 2020, GT2020-14404; American Society of Mechanical Engineers: Online, 2020. https://doi.org/10.1115/GT2020-14404.

(42) Li, H.; Su, X.; Yuan, X. Analysis of the Relationship between Turbulence Characteristics and Loss Mechanism in the Tip Leakage Flow of Turbine Blade. In Chinese International Turbomachinery Conference; Nanchang, China, 2020.

(43) Chen, Z.; Zhang, Z.; Li, Y.; Su, X.; Yuan, X. Vortex Dynamics Based Analysis of Internal Crossflow Effect on Film Cooling Performance. International Journal of Heat and Mass Transfer 2019, 145, 118757. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118757.

(44) Bian, X.; Wang, Q.; Chen, Z.; Su, X.; Yuan, X. Hybrid RANS/LES Study of Complex Turbulence Characteristics and Flow Mechanisms on the Highly-Loaded Turbine Endwall. Aerospace Science and Technology 2019, 94, 105404. https://doi.org/10.1016/j.ast.2019.105404.

(45) Su, X.; Ma, C.; Yuan, X. Adjoint-Based Geometrically Constrained Aerodynamic Optimization of a Transonic Compressor Stage. Journal of Thermal Science 2019, 28 (5), 850–861. https://doi.org/10.1007/s11630-019-1141-5.

(46) Li, H.; Su, X.; Yuan, X. Entropy Analysis of the Flat Tip Leakage Flow with Delayed Detached Eddy Simulation. Entropy 2019, 21 (1). https://doi.org/10.3390/e21010021.

(47) Li, Y.; Su, X.; Yuan, X. The Effect of Mismatching Between Combustor and HP Vanes on the Aerodynamics and Heat Load in a 1-1/2 Stages Turbine. Aerospace Science and Technology 2019, 86, 78–92. https://doi.org/https://doi.org/10.1016/j.ast.2018.12.023.

(48) Zhang, H.; Li, Y.; Chen, Z.; Su, X.; Yuan, X. Multi-Fidelity Model Based Optimization of Shaped Film Cooling Hole and Experimental Validation. International Journal of Heat and Mass Transfer 2019, 132, 118–129. https://doi.org/10.1016/j.ijheatmasstransfer.2018.11.156.

(49) 卞修涛; 林敦; 苏欣荣; 袁新. 高负荷透平叶片流动机理及湍流特性研究. 工程热物理学报 2019, 40 (8), 1758–1766.

(50) 李毅飞; 张扬; 苏欣荣; 袁新. 透平横向流动对成型孔气膜冷却的影响. 工程热物理学报 2019, 40 (6), 1229–1232.

(51) 李会; 苏欣荣; 袁新. 基于混合RANS/LES的跨音速叶栅流动机理与损失分析. 汽轮机技术 2019, 61 (2), 4–8.

(52) Wang, Q.; Li, Y.; Bian, X.; Su, X.; Yuan, X. Large-Eddy Simulation of Shaped Hole Film Cooling with the Influence of Cross Flow. In Proceedings of ASME Turbo Expo 2019, GT2019-90180; Phoenix, USA, 2019. https://doi.org/10.1115/GT2019-90180.

(53) Li, H.; Bian, X.; Su, X.; Yuan, X. Flow Mechanism and Loss Analysis of Tip Leakage Flow with Delayed Detached Eddy Simulation. In Proceedings of ASME Turbo Expo 2019, GT2019-90410; Phoenix, USA, 2019. https://doi.org/10.1115/GT2019-90410.

(54) Zhang, H.; Li, Y.; Chen, Z.; Su, X.; Yuan, X. Multi-Fidelity Based Optimization of Shaped Film Cooling Hole and Experimental Validation. In Proceedings of ASME Turbo Expo 2019, GT2019-90088; Phoenix, USA, 2019. https://doi.org/10.1115/GT2019-90088.

(55) Chen, Z.; Su, X.; Yuan, X. Film Cooling Performance of Endwall Vertical Hole for the Horse Shoe Vortex Formation Region. In Proceedings of International Gas Turbine Congress; Tokyo, Japan, 2019.

(56) Bian, X.; Wang, Q.; Su, X.; Yuan, X. Hybrid RANS/LES Study of the Complex Turbulence Characteristics and Flow Mechanism in a Highly-Loaded Turbine Blade. In Proceedings of International Gas Turbine Congress; Tokyo, Japan, 2019.

(57) Li, H.; Su, X.; Yuan, X. Entropy Transportation Equation Based on Loss Mechanism Analysis with High Fidelity Turbulence Simulation Results. In Proceedings of Global Power and Propulsion Society; Beijing, China, 2019. https://doi.org/10.33737/gpps19-bj-032.

(58) Wang, Q.; Zhang, Z.; Su, X.; Yuan, X. INCREMENTAL PROPER ORTHOGONAL DECOMPOSITION BASED METHOD FOR THE ANALYZATION OF LARGE SCALE HIGH FIDELITY SIMULATION RESULTS. In Proceedings of Global Power and Propulsion Society; Beijing, China, 2019. https://doi.org/10.33737/gpps19-bj-026.

(59) Zhang, Z.; Wang, Q.; Su, X.; Yuan, X. An Analytical Model for the Heat Transfer of Array Impingement. In Proceedings of 24th ISABE conference; Canberra, Australia, 2019.

(60) Liu, H.; Su, X.; Yuan, X. Accelerating Unstructured Large Eddy Simulation Solver with GPU. Engineering Computations 2018, 35 (5), 2025–2049. https://doi.org/10.1108/EC-01-2018-0043.

(61) Zhou, Y.; Zhang, Y.; Su, X.; Yuan, X. Effect of Inlet Rotating Swirl on Endwall Film Cooling for Two Representative Hole Arrangements. Chinese Journal of Aeronautics 2018, 31 (5), 1095–1108. https://doi.org/10.1016/j.cja.2018.03.008.

(62) Lin, D.; Su, X.; Yuan, X. The Development and Mechanisms of the High Pressure Turbine Vane Wake Vortex. Journal of Engineering for Gas Turbines and Power 2018, 140 (9), 092601. https://doi.org/10.1115/1.4039802.

(63) Gou, J.; Su, X.; Yuan, X. Adaptive Mesh Refinement Method Based Large Eddy Simulation for the Flow over Circular Cylinder at ReD=3900. International Journal of Computational Fluid Dynamics 2018, 32 (1), 1–18. https://doi.org/10.1080/10618562.2018.1461845.

(64) Li, Y.; Zhang, Y.; Su, X.; Yuan, X. Experimental and Numerical Investigations of Shaped Hole Film Cooling with the Influence of Endwall Cross Flow. International Journal of Heat and Mass Transfer 2018, 120, 42–55. https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.150.

(65) Lin, D.; Su, X.; Yuan, X. DDES Analysis of the Wake Vortex Related Unsteadiness and Losses in the Environment of a High-Pressure Turbine Stage. Journal of Turbomachinery 2018, 140 (4), 041001. https://doi.org/10.1115/1.4038736.

(66) Gou, J.; Yuan, X.; Su, X. Adaptive Mesh Refinement Method Based Investigation of the Interaction between Shock Wave, Boundary Layer, and Tip Vortex in a Transonic Compressor. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 2018, 232 (4), 694–715. https://doi.org/10.1177/0954410016687142.

(67) Lin, D.; Bian, X.; Su, X.; Yuan, X. Delayed Detached-Eddy Simulations of a Full 3-Dimensional High-Pressure Turbine Stage: Part I-Flow Topology. In Proceedings of ASME Turbo Expo 2018, GT2018-77237; Oslo, Norway, 2018. https://doi.org/10.1115/GT2018-77237.

(68) 周杨; 张扬; 苏欣荣; 袁新. 进口旋流周向位置对高压涡轮进口导叶气动特性的影响. 航空动力学报 2018, 32 (2), 402–410. https://doi.org/10.13224/j.cnki.jasp.2018.02.018.

(69) 林敦; 苏欣荣; 袁新. 高压透平导叶尾迹涡的发展与机理分析. 工程热物理学报 2018, 39 (2), 301–306.

(70) Wang, H.; Lin, D.; Su, X.; Yuan, X. Entropy Analysis of the Interaction between the Corner Separation and Wakes in a Compressor Cascade. Entropy 2017, 19 (7). https://doi.org/10.3390/e19070324.

(71) Lin, D.; Su, X.; Yuan, X. Local Entropy Generation in Compressible Flow through a High Pressure Turbine with Delayed Detached Eddy Simulation. Entropy 2017, 19 (1), 29. https://doi.org/10.3390/e19010029.

(72) Gou, J.; Yuan, X.; Su, X. A High-Order Element Based Adaptive Mesh Refinement Strategy for Three-Dimensional Unstructured Grid. International Journal for Numerical Methods in Fluids 2017, 85 (1), 538–560. https://doi.org/10.1002/fld.4397.

(73) Su, X.; Yuan, X. Improved Compressor Corner Separation Prediction Using the Quadratic Constitutive Relation. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 2017, 231 (7), 618–630. https://doi.org/10.1177/0957650917709367.

(74) Li, Y.; Zhang, Y.; Su, X.; Yuan, X. Influence of Mainstream Cross Flow on Film Cooling Performance and Jet Flow Field. In Proceedings of ASME Turbo Expo 2017, GT2017-64234; Charlotte, USA, 2017. https://doi.org/10.1115/GT2017-64234.

(75) Lin, D.; Su, X.; Yuan, X. DDES Analysis of Wake Vortex Related Unsteadiness and Losses in the Environment of HPT Stage. In Proceedings of ASME Turbo Expo 2017, GT2017-64152; Charlotte, USA, 2017. https://doi.org/10.1115/GT2017-64152.

(76) Liu, H.; Gou, J.; Su, X.; Yuan, X. Large Eddy Simulation of Transition Mechanism in a Compressor Blade with GPU-Based Finite Volume Solver. In Proceedings of GPPF Asia and Middle East Forum, GPPF-2017-0093; Shanghai, China, 2017.

(77) Zhang, Z.; Su, X.; Yuan, X. Loss Mechanism and Assessment in Mixing between Main Flow and Coolant Jets with DDES Simulation. In Proceedings of GPPF Asia and Middle East Forum, GPPF-2017-0200; Shanghai, China, 2017.

(78) Ma, C.; Su, X.; Yuan, X. An Efficient Unsteady Adjoint Optimization System for Multistage Turbomachinery. Journal of Turbomachinery 2017, 139 (1), 11003–11003. https://doi.org/10.1115/1.4034185.

(79) 卞修涛; 林敦; 苏欣荣; 袁新. 跨音透平中激波与边界层、尾迹干涉机理研究. 工程热物理学报 2017, 38 (5), 965–969.

(80) 刘宏斌; 苏欣荣; 袁新. 基于GPU的内流高精度湍流模拟. 工程热物理学报 2017, 38 (11), 2341–2347.

(81) 马灿; 苏欣荣; 袁新. 单级跨音压气机非定常伴随优化. 工程热物理学报 2017, 38 (3), 504–508.

(82) 苏欣荣; 袁新. 并行计算环境中的高效气热耦合方法. 工程热物理学报 2017, 38 (1), 49–53.

(83) Gou, J.; Zhang, Y.; Su, X.; Yuan, X. Numerical Investigation on the Effects of Real Industrial Bleeding Geometry in a High-Speed Compressor Stage. Journal of Mechanical Science and Technology 2016, 30 (11), 5275–5286. https://doi.org/10.1007/s12206-016-1046-0.

(84) Gou, J.; Su, X.; Yuan, X. Adaptive Mesh Refinement for DDES Simulation on Transonic Compressor Cascade with Unstructured Mesh. In Proceedings of ASME Turbo Expo 2016; Seoul, Korea, 2016. https://doi.org/10.1115/GT2016-56925.

(85) Ma, C.; Su, X.; Yuan, X. Adjoint-Based Unsteady Aerodynamic Optimization of a Transonic Turbine Stage. In Proceedings of ASME Turbo Expo 2016; Seoul, Korea, 2016. https://doi.org/10.1115/GT2016-56885.

(86) Lin, D.; Su, X.; Yuan, X. Delayed Detached-Eddy Simulations of a High Pressure Turbine Vane. In Proceedings of ASME Turbo Expo 2016; Seoul, Korea, 2016. https://doi.org/10.1115/GT2016-56911.

(87) 周杨; 张扬; 苏欣荣; 袁新. 一种抵抗旋流扰动的端壁气膜孔分布. 工程热物理学报 2016, 37 (12), 2544–2548.

(88) 林敦; 苏欣荣; 袁新. 高压透平导叶的DDES模拟. 工程热物理学报 2016, 37 (10), 2084–2088.

(89) 李毅飞; 马灿; 苏欣荣; 袁新. 热斑旋流对燃气透平高压静叶的影响研究. 工程热物理学报 2016, 37 (6), 1189–1193.

(90) 苟金澜; 苏欣荣; 袁新. 跨音压气机中非结构网格自适应的研究. 工程热物理学报 2016, 37 (4), 729–733.

(91) 苏欣荣; 袁新. 用于叶轮机械复杂流动的网格自适应方法. 工程热物理学报 2016, 37 (2), 259–263.

(92) Su, X. Accurate and Robust Adaptive Mesh Refinement for Aerodynamic Simulation with Multi-Block Structured Curvilinear Mesh. Int. J. For Numerical Methods In Fluids 2015, 77 (12), 747–766. https://doi.org/10.1002/fld.4004.

(93) Ma, C.; Su, X.; Yuan, X. Discrete Adjoint Solution of Unsteady Turbulent Flow in Compressor. In Proceedings of ASME Turbo Expo 2015; Montreal, Canada, 2015. https://doi.org/10.1115/GT2015-42948.

(94) 苏欣荣; 袁新. 压气机角区分离的非线性涡黏模型预测. 工程热物理学报 2015, 36 (7), 1437–1441.

(95) 马灿; 苏欣荣; 袁新. 用于非定常流动的谐波平衡方法研究. 工程热物理学报 2015, 36 (4), 739–743.

(96) Ma, C.; Su, X.; Gou, J.; Yuan, X. Runge-Kutta/Implicit Scheme for the Solution of Time Spectral Method. In Proceedings of ASME Turbo Expo 2014; Dusseldorf, Germany, 2014. https://doi.org/10.1115/GT2014-26474.

(97) Su, X.; Yuan, X. Predicting Compressor Corner Separation with Nonlinear Eddy-Viscosity Model. In Proceedings of Asian Congress on Gas Turbine; Seoul, Korea, 2014.

(98) Su, X.; Yamamoto, S. A New Matrix Dissipation Model for Central Scheme. International Journal for Numerical Methods in Fluids 2014, 74 (7), 494–513. https://doi.org/10.1002/fld.3860.

(99) Su, X.; Yamamoto, S.; Nakahashi, K. Extending the Building Cube Method to Curvilinear Mesh with Adaptive Mesh Refinement. Journal of Fluid Science and Technology 2014, 9 (5), JFST0074–JFST0074. https://doi.org/10.1299/jfst.2014jfst0074.

(100) Su, X.; Yamamoto, S. Turbomachinery Flow Computation with Adaptive Mesh Refinement. In Proceedings of 27th Computational Fluid Dynamics Symposium; Nagoya, Japan, 2013.

(101) Su, X.; Yamamoto, S.; Nakahashi, K. Extending the Building Cube Method to Curvilinear Mesh with Adaptive Mesh Refinement. In Proceedings of 10th International Conference on Fluid Dynamics; Sendai, Japan, 2013.

(102) Su, X.; Sasaki, D.; Nakahashi, K. Cartesian Mesh with a Novel Hybrid WENO/Meshless Method for Turbulent Flow Calculations. Computers and Fluids 2013, 84, 69–86. https://doi.org/10.1016/j.compfluid.2013.05.017.

(103) Su, X.; Yamamoto, S.; Yuan, X. On the Accurate Prediction of Tip Vortex: Effect of Numerical Schemes. In Proceedings of ASME Turbo Expo 2013; San Antonio, 2013. https://doi.org/10.1115/GT2013-94660.

(104) Su, X.; Yamamoto, S.; Nakahashi, K. Analysis of a Meshless Solver for High Reynolds Number Flow. International Journal for Numerical Methods in Fluids 2013, 72 (5), 505–527. https://doi.org/10.1002/fld.3747.

(105) Su, X.; Sasaki, D.; Nakahashi, K. On the Efficient Application of Weighted Essentially Nonoscillatory Scheme. International Journal for Numerical Methods in Fluids 2013, 71 (2), 185–207. https://doi.org/10.1002/fld.3655.

(106) Su, X.; Yamamoto, S.; Nakahashi, K. A Simple Method for Three Dimensional Characteristic Boundary Conditions with Cell-Centered Solver. In Proceedings of 9th International Conference on Fluid Dynamics; Sendai, Japan, 2012.

(107) Wang, Z.; Su, X.; Yuan, X. Low-Dissipation Numerical Method with Kinetic Energy Conservation on Unstructured Meshes. Journal of Tsinghua University 2012, 52 (4), 468–472.

(108) Su, X.; Sasaki, D.; Nakahashi, K. A Hybrid Scheme for the near Wall Treatment of Building Cube Method. Journal of Fluid Science and Technology 2012, 7 (2), 197–208. https://doi.org/10.1299/jfst.7.197.

(109) 王中南; 苏欣荣; 袁新. 非结构网格上动能守恒的低耗散数值方法. 工程热物理学报 2012, 52 (4), 468–472. https://doi.org/10.16511/j.cnki.qhdxxb.2012.04.030.

(110) Su, X.; Sasaki, D.; Nakahashi, K. Efficient Implementation of WENO Scheme on Structured Meshes. In Proceedings of 25th Computational Fluid Dynamics Symposium; Osaka, Japan, 2011.

(111) Su, X.; Sasaki, D.; Nakahashi, K. Development of a Directional Ghost Cell Method and the Multigrid Acceleration for the Building Cube Method. In Proceedings of 8th International Conference on Fluid Dynamics; Sendai, Japan, 2011.

(112) Su, X.; Sasaki, D.; Nakahashi, K. A Hybrid Scheme for the near Wall Treatment of Building Cube Method. In Proceedings of 8th International Conference on Fluid Dynamics; Sendai, Japan, 2011.

(113) Su, X.; Yuan, X. Implicit Solution of Time Spectral Method for Periodic Unsteady Flows. International Journal for Numerical Methods in Fluids 2010, 63 (7), 860–876. https://doi.org/10.1002/fld.2111.

(114) 苏欣荣; 袁新. 谱方法用于非定常流动计算的隐式求解. 工程热物理学报 2009, 30 (12), 2010–2012.

(115) 苏欣荣; 袁新. 时域谱方法用于内流非定常流动计算. 清华大学学报 2009, 49 (2), 261–264. https://doi.org/10.16511/j.cnki.qhdxxb.2009.02.009.

(116) 苏欣荣; 袁新. 多级轴流压气机全工况特性计算. 工程热物理学报 2006, 27 (2), 214–216.

(117) 苏欣荣; 袁新. 多级轴流压气机全工况特性预测. 热力透平 2005, 34 (4), 203–206.