任静教授

办公电话:010-62796401

电子邮箱:renj@tsinghua.edu.cn

通讯地址:北京市海淀区清华大学能源与动力工程系燃气轮机研究所

邮编:100084

教育背景  

1992/09-1997/06,中国农业大学,流体机械专业,博士,

1988/09-1992/06,北京农业工程大学,流体机械专业,学士

工作履历

2008/03-至今,清华大学,能源与动力工程系,教授

1999/11-2008/02,德国亚琛工业大学,机械学院燃气轮机与汽轮机研究所,博士后/项目主管

1997/09-1999/06,清华大学,水利系流体机械专业,博士后

学术兼职

《Journal of Power and Energy》编辑委员会编委

ASME Turbo Expo燃气轮机国际会议传热委员会委员及Best Paper评委

研究领域

燃气轮机冷却机制和优化方法

燃气轮机空气系统流热耦合特性

叶轮机械气动热力学

研究概况

已完成科研项目

自然科学基金国际合作项目:燃气轮机高温部件交互影响机制

自然科学基金面上项目:透平叶栅环境下强掺混气膜冷却流动传热机理研究

自然科学基金面上项目:高温高湿透平中多物理场耦合机理研究

科技部973重大项目课题:燃气轮机气动热力设计理论与系统集成

清华大学自主科研项目:自主知识产权重型燃气轮机核心技术研究

学术成果

任静,清华大学能源与动力工程系燃气轮机研究所教授、博导,ASME Tubo Expo传热委员会委员及最佳论文评委,《Journal of Power and Energy》期刊编委。主要研究方向是燃气涡轮冷却机理和优化方法,包括燃气涡轮高效冷却机制、空气系统气动传热特性的研究。建立了具有自主知识产权的气冷涡轮优化平台,并应用于燃气轮机气冷透平的自主研发。先后负责过多项国家973燃气轮机项目课题、自然科学面上项目、国际/企业合作项目。获发明专利3项,在国际期刊、会议和国内核心期刊上发表文章三百余篇。主要讲授《叶轮机械气动热力学》和《燃气轮机关键技术和应用》两门课程。

Recent Publications:

1. Li W, Yang L, Ren J, Hongde Jiang. Effect of thermal boundary conditions and thermal conductivity on conjugate heat transfer performance in pin fin arrays[J]. International Journal of Heat and Mass Transfer, 2016, 95: 579-592.

2. Li W, Ren J, Hongde J, et al. Assessment of six turbulence models for modeling and predicting narrow passage flows, part 2: Pin fin arrays[J]. Numerical Heat Transfer, Part A: Applications, 2016, 69(5): 445-463.

3. Li W, Ren J, Hongde J, et al. Assessment of six turbulence models for modeling and predicting narrow passage flows, part 1: Impingement jets[J]. Numerical Heat Transfer, Part A: Applications, 2016, 69(2): 109-127.

4. Li X, Ren J, Jiang H. Multi-row film cooling characteristics on a vane endwall[J]. International Journal of Heat and Mass Transfer, 2016, 92: 23-33.

5. Qin, Yanmin1; Li, Xueying1; Ren, Jing1; Jiang, Hongde. Effects of compound angle on film cooling effectiveness with different streamwise pressure gradient and convex curvature. International Journal of Heat and Mass Transfer, 2015 Vol.86 pp 482-491.

6. Li X, Ren J, Jiang H. Application of algebraic anisotropic turbulence models to film cooling flows[J]. International Journal of Heat and Mass Transfer, 2015, 91: 7-17.

7. Yang L., Ren J., Jiang H., Ligrani P., Experimental and numerical investigation of unsteady impingement cooling within a blade leading edge passage, International Journal of Heat and Mass Transfer, Vol.71, 2014, pp57-68

8. Kan R., Guo L., Ren J., Huang S., Jiang H.D., Yan Y.Y., Determining mainstream reference temperature using the non-dimensional temperature analysis in the transient liquid crystal technique, International Journal of Heat and Mass Transfer, Vol.72, 2014, pp 201-209

9. Chi, ZR; Ren, J; Jiang, HD, Coupled Aerothermodynamics Optimization for the Cooling System of a Turbine Vane, J. Turbomach.-Trans. ASME, Vol.136, No.5, 2014

10. Li, XY; Ren, J; Jiang, HD, Film Cooling Modeling of Turbine Blades Using Algebraic Anisotropic Turbulence Models, J. Turbomach.-Trans. ASME, Vol.136, No.11,2014

11. Chang Han, Zhongran Chi, Jing Ren and Hongde Jiang, Optimal Arrangement of Combined-Hole for Improving Film Cooling Effectiveness, Journal of Thermal Science and Engineering A[1-45]pplications , 2014, 7(1) .

12. Xueying Li, Yanmin Qin, Jing Ren, Hongde Jiang, AlgebraicAnisotropic Turbulence Modeling of Compound Angled Film Cooling Validated ByPIV and PSP Measurements, ASME Journal of Heat Transfer, v 136, n 3, March 2014

13. Zhongran Chi, Rui Kan, Jing Ren and Hongde Jiang. Experimental and Numerical Study of the Anti-Crossflows Impingement Cooling Structure, International Journal of Heat and Mass Transfer, v 64, p 567-580, 2013.

14. Hong Yin, Yanmin Qin, Jing Ren and Hongde Jiang. Effect of Inlet Swirl on the Model leading Edge of Turbine Vane. ASME GT2013-94471, San Antonio, USA, June, 2013.

15. Zhongran Chi, Jing Ren and Hongde Jiang. Cooling Structure Optimization for a Rib-roughed Channel in a Turbine Rotor Blade, ASME GT2013-94527, San Antonio, USA, June, 2013.

16. Rui Kan, Li Yang, Jing Ren, and Hongde Jiang. Effect of Rib Configuration and Lateral Ejection on a High Aspect Ratio Trailing Edge Channel, ASME GT2013-94549, San Antonio, USA, June, 2013.

17. Chang Han, Zhongran Chi,Jing Ren and Hongde Jiang. Optimal Arrangement of Combined-Hole for Improving Film Cooling Effectiveness, ASME GT2013-94561, San Antonio, USA, June, 2013.

18. Li Yang, Rui Kan,Jing Ren and Hongde Jiang. Effect of Film Cooling Arrangement on Impingement Heat Transfer on Turbine Blade Leading Edge, ASME GT2013-95261, San Antonio, USA, June, 2013.

19. 李雪英,韩昌,秦晏旻,任静,蒋洪德,扇形孔气膜冷却应用的综合特征,工程热物理学报,第34卷,第1期,55-58页,2013

20. 韩昌,任静,蒋洪德,多参数对叶顶气膜冷却的影响,工程热物理学报,第33卷,第9期,1501-1504页,2012

21. 李雪英,任静,蒋洪德,湍流粘性修正在不同孔型气膜冷却计算中的应用,工程热物理学报,第33卷,第4期,578-582页,2012

22. 李雪英,任静,蒋洪德,气膜冷却计算中湍流粘性系数的修正,工程热物理学报,第32卷,第4期,573-576页,2012

23. 秦晏旻,李雪英,郭安琪,任静,蒋洪德,多参数影响下的气膜冷却特性及预测方法,热力透平,第41卷,第1期,13-17页,2012

24. 杨力,阚瑞,任静,蒋洪德,带气膜孔内部冷却通道的流动传热特性,工程热物理学报,第32卷,第8期,1385-1388页,2011

25. 秦晏旻,李雪英,任静,蒋洪德,基于BP神经网络的多参数气膜冷却效率研究,工程热物理学报,第32卷,第7期,1127-1130页,2011

26. Chang Han, Jing Ren and Hongde Jiang. Multi-parameter influence on combined-hole film cooling system, International Journal of Heat and Mass Transfer, v 55, n 15-16, p 4232-40, July 2012.

27. Xueying Li, Jing Ren and Hongde Jiang. Full Field Algebraic Eddy Viscosity Model for the Film cooling Flows, ASME GT2012-68667, Copenhagen, Denmark, June 2012.

28. Wenping Wan, Peng Sun, Jing Ren, Hongde Jiang, Radiation Effectiveness on the Aero- and Thermodynamics in A Highly Thermally Loaded Film Cooling System, Proceedings of the ASME Turbo Expo 2011, June,6-10, Vancouver, Canada. ASME Paper GT2011-45592.

29. Peng Sun, Wenping Wan, Jing Ren, Hongde Jiang, Effect of the Hot Gas Composition on a Highly Thermally Loaded Film Cooling System, Proceedings of the ASME Turbo Expo 2011, June,6-10, Vancouver, Canada. ASME Paper GT2011-45593

30. Xueying Li, Jing Ren, Hongde Jiang, Algebraic Anisotropic Eddy-Viscosity Modeling Application to the Turbulent Film Cooling Flows, Proceedings of the ASME Turbo Expo 2011, June,6-10, Vancouver, Canada. ASME Paper GT2011-45791

31. Li, Lin ; Jing, Ren ; Hongde, Jiang, Application of γ-Re transition model for internal cooling simulation, Heat Transfer - Asian Research, v 40, n 1, p 69-77, January 2011,pp69-77,

32. Wei Chen,Jing Ren and Hongde Jiang, Effect of Turning Vane Configurations on Heat Transfer and Pressure Drop in a Ribbed Internal Cooling System, Journal of Turbomachinery. v 133, n 4, April 21, 2011

33. 李佳,任静,蒋洪德,燃气轮机高温叶片气膜冷却系统的研究进展,热力透平,第39期,第1卷,6-10页,2010

34. 李佳,韩昌,任静,蒋洪德,基于压敏漆的带横槽气膜冷却实验与数值研究,工程热物理学报,第31卷,第2卷,239-242页,2010

35. 陈伟,阚瑞,任静,蒋洪德, 涡轮叶片内部冷却通道传热和压力分布特性的实验研究, 航空动力学报2010年第25卷第12期

36. 韩昌,李佳,任静,蒋洪德, 基于PSP实验技术的双射流气膜冷却特性研究, 航空动力学报2010年第25卷第12期

37. 尹洪,任静,蒋洪德, 燃气轮机燃用中低热值燃料性能优化方案研究, 工程热物理学报2010年第31卷第8期,1303-1306页

38. 阚瑞,陈伟,任静,蒋洪德, 梯形带肋内部冷却通道的流动及传热特性, 工程热物理学报2010年第31卷第5期,753~756页

39. 李佳,韩昌,任静,蒋洪德, 基于压敏漆的带横槽气膜冷却实验与数值研究, 工程热物理学报2010年第31卷第2期,239-242页

40. Jia Li, Jing Ren, Hongde Jiang, Film Cooling Performance of the Embedded Holes in Trenches With Compound Angles, Proceedings of the ASME Turbo Expo 2010, Papar No. GT2010-22337.

41. Wang Wenping, Ren Jing, Jiang Hongde,Effects of Radiative Heat Transfer on a Highly Thermal Loaded Film Cooled Plate,Proceedings of 3rd ISJPPE(2010-ISJPPE-2023), 2010.09.17-21, Nanjing, China.

42. Wei Chen, Jing Ren, Hongde Jiang, Verification of RANS for Analyzing Convective Cooling System With and Without Ribs, Proceedings of the ASME Turbo Expo 2009, Papar No. GT2009-59427.

43. Qinxue Tan, Jing Ren, Hongde Jiang, Prediction of Flow Features in Rotating Cavities With Axial Throughflow by RANS and LES, Proceedings of the ASME Turbo Expo 2009, Papar No. GT2009-59428.

44. 林立,任静,蒋洪德, γ-Re_θ转捩模型在内部冷却叶片中的应用, 工程热物理学报2009年第30卷第11期,1849-1852页。

45. 谭勤学,任静,蒋洪德, 轴向通流旋转盘腔中流动与传热数值研究, 工程热物理学报2009年第30卷第7期,1129-1131页。

46. Diet er Bohn, Jing Ren. How Far Have We Been? – Summary of the Investigation on Rotating Cavity at IDG, RWTH Aachen Uni. -.Frontiers of Energy and Power Engineering in China,2009 Vol.27.

47. Wei Chen, Jing Ren and Hongde Jiang, Numerical investigation of heat transfer and pressure drop in smooth and ribbed U-duct, Conference of Engineering Thermophysics, Paper No. 082003, 2008.10.22-28, Tianjin, China.

48. Qinxue Tan, Jing Ren and Hongde Jiang, Aero- and thermal dynamics in a rotating cavity with axial-through flow, Paper No. 082005, 2008.10.22-28, Tianjin, China.

49. Jia Li, Jing Ren and Hongde Jiang, Numerical computation of multi-row cylindrical holes and fanshaped holes, Paper No. 082006, 2008.10.22-28, Tianjin, China.

50. Li Lin, Jing Ren and Hongde Jiang, Application of γ-Reθ transition model in a convective cooling blade, Paper No. 082007, 2008.10.22-28, Tianjin, China.

51. Wenping Wang, Jing Ren and Hongde Jiang, Aerodynamics and Conjugate heat transfer in a transonic cascade, Conference of Engineering Thermophysics, Paper No. 082008, 2008.10.22-28, Tianjin, China.

52. Jing Ren, Highly thermally loaded material and cooling technology in Ultra-Super Critical Steam Turbine, Academic Symposium of China Power Engineering, 2008.09.18-21, Nanjing, China.

53. Diet er Bohn, Jing Ren, Chris tian Tümmers. In ve sti ga tion on the un ste a ble flow struc tu re in a ro taing ca vi ty. ASME Jour nal of En gi neer ing for Gas Tur bine and En er gy (ac cept ed)

54. Dieter Bohn, Jing Ren. Laminar and Turbulent Influence on the Unsteady Flow Pattern in a Rotating Cavity. The 7th European Conference on Turbomachinery, 5 - 9 March, 2007, Athens, Greece

55. Diet er Bohn, Jing Ren, Kar sten Kus ter er. In ves ti ga tion of the Steam-cooled Blade in a Steam Turbine Ca sca de. 1st In ter na tio nal Sym po si um on Jet Pro pul sion and Po wer En gi nee ring (ISJP PE). Kun ming, Chi na. Sept. 17-22, 2006.

56. Peng Shan, Diet er Bohn, Jing Ren, Nor bert Sürken. Ther mal ly high ly load ed, por ous and cooled mul ti-layer sys tems for com bined cy cle pow er plants. 1st In ter na tio nal Sym po si um on Jet Pro pul sion and Po wer En gi nee ring (ISJP PE). Kun ming, Chi na. Sept. 17-22, 2006.

57. Diet er Bohn, Jing Ren, Chris tian Tümmers. In ve sti ga tion on the un ste a ble flow struc tu re in a ro taing ca vi ty. ASME Turbo Ex po. Bar ce lo na, Spain ?May 08-11, 2006. Paper No. GT2006-90494.

58. Diet er E. Bohn, Jing Ren, Kar sten Kus ter er. Sys tem In ves ti ga tion of the Heat Trans fer Rate in the Film Cool ing Flow field. In ter na tion al Jour nal of Ro tat ing Ma chin ery, Iss. 3, Vol. 2005, pp 211-220

59. Diet er E. Bohn, Sa bine Ausmeier, Jing Ren. Investigation of the Optimum Clocking Position in a Two-stage Axial. In ter na tion al Jour nal of Ro tat ing Ma chin ery, Iss. 3, Vol. 2005, pp 202-210

60. Diet er Bohn, Jing Ren, Chris tian Tümmers, Mi chael Sell. Ef fect of clock ing on the pres sure dis tri bu tion in a two-stage ax ial tur bine. 17th In ter na tion al Sym po sium on Air breath ing En gines. Sep tem ber 4-9, 2005, Mu nich, Ger ma ny. Paper No. ISABE-2005-1034.

61. Diet er Bohn, Jing Ren, Chris tian Tümmers, Mi chael Sell. Un steady 3D-Nu mer i cal In ves ti ga tion of the In flu ence of the Shroud Cav i ties on the Sta tor-Ro tor In ter ac tion in a 2-stage Tur bine. 17th In ter na tion al Sym po sium on Air breath ing En gines. Sep tem ber 4-9, 2005, Mu nich, Ger ma ny. Paper No. ISABE-2005-1155.

62. Diet er E. Bohn, Jing Ren, Kar sten Kus ter er. Cool ing per for mance of the steam-cooled blade in a steam tur bine cas cade. ASME Turbo Ex po. Re no, Neva da, USA ? June 06-09, 2005. Paper No. GT2005-68148.

63. Diet er Bohn, Jing Ren, Chris tian Tümmers, Mi chael Sell.Unsteady 3D-Numerical Investigation of the Influence of the Blading Design on the Stator-Rotor Interaction in a 2-Stage Tur bi ne. ASME Turbo Ex po. Re no, Ne va da, USA ? June 06-09, 2005. Paper No. GT2005-68115.

64. Diet er E. Bohn, Jing Ren. Tu bines clock in: im prov ing ef fi cien cy by the clock ing tech nique, CD Adap co Dy nam ics, Is sue 24, Spring 2005, pp. 22-23.

65. Die ter Bohn, Jing Ren. Im prov ing tur bi ne's ef fi cien cy by the clock ing tech nique. STAR European Con feren ce 2005, Fe bru a ry 28 - March 1, 2005, Lon don, UK

66. Diet er E. Bohn, Jing Ren. In flu ence of Stator Clocking on the Unsteady 3D Flow in a Two-stage Tur bine. AS ME Jour nal of Tur bom a chin ery.Vol. 127 Is sure 1, pp 156-163 (re vised ver sion of the AS ME paper GT2004-53511)

67. Dieter Bohn, Joa chim Funcke, Jing Ren, Nor bert Sürken, Mi chael Sell, Thom as Os te rhage. Nu mer i cal and ex per i men tal in ves ti ga tion of the wet ness in the front stag es of a low-pres sure steam tur bine. VGB Pow er Tech nol o gy, Is sue 11/2004

68. Bohn, D., and Ren, J.. In flu ence of Stator Clocking on the Unsteady 3-dimensional Flow in a 2-stage Tur bine. ASME Turbo Ex po. Vien na, Austria ? June 14-17, 2004. ASME paper 2004-GT-53511

69. Bohn, D., Funcke, J., Ren, J., and Sürken, N.. Nu mer is che und ex per i men telle Un ter su chung der N?sse in der Front stu fen von Nie der druck dampf tur bin en. Dampf tur bi nen und Dampf tur bi nen be trieb 2004. Re gens burg, Ger ma ny. Ju ne 15-16, 2004. (Ger man)

70. Bohn, D., Ren, J., and Kus ter er, K.. Sys tem In ves ti ga tion of the Heat Trans fer Rate in the Film Cool ing Flow field. The 10th of International Symposium on Transport Phenomena and Dy nam ics of Rotating Ma chin ery. Hon o lu lu, Hawaii, March 07-11, 2004. paper ISROMAC10-2004-138.

71. Bohn, D., Ausmeier, S., and Ren, J.. Investigation of the Optimum Clocking Position in a Two-stage Axial. The 10th of International Symposium on Transport Phenomena and Dy nam ics of Rotating Ma chin ery. Hon o lu lu, Hawaii, March 07-11, 2004. Paper ISROMAC10-2004-144

72. Lep ers, J., Kusterer, K., Bohn, D., and Ren, J.. Cool ing Tow ers in the wind. CD adap co Dy nam ics, Issue21, Fall 2003.

73. Bohn, D., Ren, J., and Kus ter er, K.. Conjugate heat Transfer Analysis for Film cooling Configuration with Different Hole Geometries. Proceedings of AS ME TURBO EXPO 2003, June 16-19, 2003, Atlanta, Georgia, USA, GT-2003-38369

74. Bohn, D., Ren, J., and Kus ter er, K.. Con ju ga te Heat Transfer Analysis of Cooling Jets Ejected from a Row of Shaped Ho les. The 6th In ter na tio nal Sym po si um on Ex pe ri men tal and Com pu ta tio nal Ae ro ther mo dy na mics of In ter nal Flows (6th ISAIF), Apr. 7-11, 2003 Shanghai, China

75. Bohn, D., Ren, J., and Kus ter er, K.. Influence of Conjugate Heat Transfer on Film Cooling. The 5th European Conference on TUR BO MA CHIN ERY, 17 - 22 March, 2003, PRAGUE, Czech Republic

76. Bohn, D., and Ren, J.. A Unitary Heterogeneous Nucleation Model for superheated Compressible Flow. The 4 th In ter na tion al con fer ence on Pumps and Fans (4 th ICPF), Au gust 26-29, 2002, Tsin ghua Uni ver si ty, Beij ing, Chi na

77. Bohn, D., Ker pic ci, H., Ren, J., and Sürken, N.. Homogeneous and Het er o ge ne ous Nucleation and Wet-Steam Flow in a Noz zle and an LP-Turbine Cas cade. The 9th In ter na tio nal Sym po si um on the Trans port Phe no me na and Dy na mics of Ro ta ting Ma chin ery, Hon o lu lu, Ha waii, Fe bru a ry 10-14, 2002

78. Bohn, D., and Ren, J.. Salt Solution and Radius Dependence of Surface Tension in Heterogeneous Nucleation in Steam Turbine. 2001 Chi ne se En gi nee ring Ther mo phy sics Con feren ce, Oct. 14-17, 2001.

79. Bohn, D., Kerpicci, H., Ren, J., and Surken, N.. Homogeneous and heterogeneous mucleation in a nozzle guide vane of a LP-steam turbine. 4th European Conference on Turbomachinery, March 20-23, 2001,Firenze, Italy. pp813-822

80. Bohn, D., Kerpicci, H., Ren, J., and Surken, N.. Aktive beeinflussung der Thermodynamischen und kinematischen Relaxationsprozesse in Niederdruckdampfturbinen durch Intensiverung des keimbildungsprozesses. Siebtes Statusseminar Verbundprojeckt hochtemperature-Gasturbine & Verbundprojeckt CO2-armes Kraftwerk-500MW auf einer Welle, Dec.7-8, 2000. pp1303-1312 (German)

81. Bohn, D., and Ren, J.. Numerical research on the hetergeneous condensation in a nozzle guide vane of a LP-steam turbine. 2th International Symposium on Fluid machinery and fluid Engineeting, Oct. 22-25, 2000, Beijing, China. pp.314-321

82. Bohn, D., Kerpicci, H., and Ren, J.. Comparison of homogeneous and heterogeneous condensation in a nozzle guide vane of a LP-steam turbine. 5th International Symposium on Heat Transfer. Aug. 12-16, 2000, Beijing, China. pp. 533-538